1. The
Power IEC jack
connects to AC line voltage, 100-240 VAC, 50/60 Hz.
2.
Fault, Locate, and Power LEDs
The
Fault LED
(red) turns on when something in the hardware goes awry. The first step in trou-
bleshooting the problem is to open the Halogen software and check the status of this HAL device.
The
Locate LED
flashes green when you place this HAL device in Locate Mode (via the Halogen soft-
ware). The purpose of this Locate functionality is for verification, when working in the software, of the
physical device you are configuring or viewing.
The
Power LED
lights when the HAL hardware is powered on.
3.
Ethernet port and LAN and Link LEDs
Use this port to connect HAL to an Ethernet switch or directly to a computer.
CHAPTER 2: Hardware Component Details
15
Содержание HAL1x
