06
Installation of ceramic toilet
Cardboard
305mm
Precaution before installing
Choose the correct angle
valve in the package
that fits for your water inlet.
Minimum dynamic working water pressure:
0.09MPa or more (3.96Gal/min(15L/min) or
more), failure to meet this pressure will not
achieve the best flushing effect.
Remark: Apply the methods below if you
don’t have water pressure testing device.
Hose in the
package
Water storage
barrel
Open the angle valve and connect water inlet
for 10s, once the water volume is above 2.5L,
the minimum water pressure of the product is
ensured.
Draw drain outlet centerline on the floor,
Install angle valve at proper position on
wall according to dimension of toilet.
1. Installation of mating angle valve
Line
Drain outlet
Drain outlet
Mating angle valve
2. Cardboard installation
Align cardboard with the centerline of
drain outlet;
Draw contour line according to cardboard;
Angle valve connector
Inlet connector
Flexible hose
3.Hose
Connect the water inlet and angle valve of the
toilet with the matching hose and tighten it
Nut
Bolt
4.Mounting bracket installation
Assemble the mounting bracket with bolts
and then install them to the pre-installed
flange plate on the ground and lock tight
with nuts.
Mounting bracket
Washer
Содержание W5100S
Страница 14: ......
Страница 15: ...12 frequency three 3 years...