R&T W5100S, Инструкция по установке и эксплуатации

Страница: 10 / 16

After installation
08
1. Turn on the angle valve
Check the thread connection for leaks to ensure complete sealing.
Turn the angle valve anticlockwise to the full open position.
Tips: The angle valve opens with a large torque for the first time.
When the batteries are successfully installed, the red indicator light will flash once.
Take out the battery box from the accessory kit and install 4pcs 1.5V “AA” alkaline
batteries. Plug battery box into the DC socket of toilet and then stick the battery box
to the Velcro on the bottom of the toilet.
When re-installing the cover of battery box, use your fingers to squeeze the side
of rubber plug to exhaust air out of the box and ensure sealing.
2. Power connection
3. Self-inspection
Notes:
1. Must be 1.5V “AA” alkaline battery;
2. Batteries of different brands, new and
used batteries cannot be used together.
3. Battery life will be significantly reduced
when using non-alkaline batteries;
4. When installing the inner box components,
follow the installation direction shown in
the label.
Angle valve