Install the Unit in the 19 Inch Rack
R&S
®
ZZA-GE23
6
Assembly Instruction, English 5601.5655.02 ─ 03
3
Install the Unit in the 19 Inch Rack
Risk of instrument damage due to insufficient airflow in a rack
If the instrument is run with insufficient airflow for a longer period, the instrument over-
heats, which can disturb the operation or cause the instrument to shut down.
To avoid overheating, make sure that the air can circulate through the instruments.
Reserve enough space on the outsides (at least 10 cm) to ensure sufficient cooling.
To install the instrument:
1. Place the instrument with the bottom feet position facing up.
2. Loosen the four screws at the rear panel partially and slide the two rear brackets
over the screws position.
3. Tighten the four screws back partially so that mounting of the lower cover can be
adjusted for step 5.
4. Mount the lower cover over the two rear brackets and tighten the four screws on
the lower cover.
5. Tighten the four screws back at the two rear brackets.
www.allice.de
Allice Messtechnik GmbH
