Command reference
R&S
®
ZNL/ZNLE
856
User Manual 1178.5966.02 ─ 19
Example:
Assume that the current channel setup contains two channels
numbered 1 and 2, respectively, and that sweep segments have
been defined for channel no. 1.
MMEM:STOR:SEGM 1, 'C:\Users\Public\Documents\
Rohde-Schwarz\ZNL\SweepSegments\Seg_Ch1.SegList'
Store the sweep segment definition of channel 1 to a sweep
segment file.
MMEM:LOAD:SEGM 2, 'C:\Users\Public\Documents\
Rohde-Schwarz\ZNL\SweepSegments\Seg_Ch1.SegList'
Load the previously created sweep segment file and use the
sweep segments for channel 2.
Usage:
Setting only
Manual operation:
See
MMEMory:LOAD:TRACe
<DestinationTraceName>, <TraceFile>[,
<SParamOrTraceName>]
Loads trace data from a specified trace file and assigns it to a trace with a specified
name. Traces are created using the
CALCulate<Ch>:PARameter:SDEFine
mand.
Setting parameters:
<Destination
TraceName>
Name of an existing data trace in the active channel setup
(string parameter). The trace data is loaded into a memory trace
associated with the specified data trace. If one or more memory
traces are already associated with the specified data trace, the
last generated memory trace is overwritten.
<TraceFile>
String parameter to specify the name and directory of the trace
file to be loaded. Several file formats for trace files are suppor-
ted. The file extensions
*.s<n>p
,
*.csv
, and
*.dat
for Touch-
stone, ASCII, and Matlab files are mandatory.
If no path is specified the analyzer searches the current direc-
tory, to be queried with
<SParam
OrTraceName>
Optional string parameter: For imported Touchstone files for
more than one port (
*.s2p
,
*.s3p
,
*.s4p
), the parameter
denotes the imported S-parameter ('S11', 'S12', ...). For ASCII
(
*.csv
) and Matlab (
*dat
) files, the parameter references a
trace name in the file (case sensitive). If the parameter is omit-
ted, the first trace in the specified file is imported.
VNA command reference
