R&S ZNL, Руководство пользователя

Страница: 671 / 1135

Command reference
R&S
®
ZNL/ZNLE
671 User Manual 1178.5966.02 ─ 19
Parameters:
<Boolean> ON | OFF - Limit line on or off.
*RST:
OFF
Example: *RST; :CALC:LIM:CONT 1 GHZ, 2 GHZ
Define an upper limit line segment in the stimulus range
between 1 GHz and 2 GHz, using default response values.
CALC:LIM:DISP ON
Show the limit line segment in the active diagram.
Manual operation: See "Show Limit Line" on page 432
CALCulate<Chn>:LIMit:FAIL?
Returns a 0 or 1 to indicate whether or not the limit check has failed. 0 represents pass
and 1 represents fail
Tip: Use
CALCulate:CLIMits:FAIL?
to perform a composite (global) limit check.
Since V2.20 of the R&S ZNL/ZNLE FW the result is automatically recalculated when-
ever a relevant setting is changed, i.e. a subsequent query will return the updated limit
violation state.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Example: *RST; :CALC:LIM:CONT 1 GHZ, 2 GHZ
Define an upper limit line segment in the stimulus range
between 1 GHz and 2 GHz, using default response values.
CALC:LIM:STAT ON; FAIL?
Switch the limit check on and query the result.
CALC:LIM:STAT:AREA LEFT, TOP
For a subsequent check at the GUI or a hardcopy, move the
pass/fail message to the top left position.
Usage: Query only
Manual operation: See "Limit Check" on page 432
CALCulate:LIMit:FAIL:ALL? [<ChannelSetup>]
Returns a 0 or 1 to indicate whether or not the limit line check has failed for at least
one channel in the referenced channel setup. 0 represents pass and 1 represents fail.
Query parameters:
<ChannelSetup> Name of a VNA channel setup. Can be omitted if the active VNA
channel setup shall be referenced.
Usage: Query only
Manual operation: See "Limit Check" on page 432
VNA command reference