R&S ZNL, Руководство пользователя

Страница: 542 / 1135

VNA GUI reference
R&S
®
ZNL/ZNLE
542 User Manual 1178.5966.02 ─ 19
Remote command:
MMEMory:LOAD:VNETworks<Ch>:DIFFerential:EMBedding<LogPt>
10.14.2 Offset tab
Defines length offset parameters for each port.
Use the complementary dock widget to activate or deactivate length/loss compensation
for selected ports (see
Chapter 10.14.1.2, "Offset panel" , on page 533).
The marker function Zero Delay at Marker function overwrites the offset parameters.
Background information
Refer to the following sections.
●
Chapter 9.6, "Offset parameters and de-/embedding" , on page 277
●
Chapter 9.6.1.1, "Definition of offset parameters" , on page 278
●
Chapter 9.6.1.3, "Auto Length" , on page 279
●
Chapter 9.6.1.6, "Application and effect of offset parameters" , on page 282
●
Chapter 9.6.1.7, "Offset parameters for balanced ports" , on page 283
●
Chapter 9.6.1.5, "Fixture Compensation" , on page 281
10.14.2.1 Controls on the Offset tab
Offset Embed softtool