Manual Operation
R&S
®
UPV
189
Getting Started 1146.2078.62 ─ 09
–
LAN Reset
Another confirmation query appears: "Do you really want to reset the LAN Set-
tings? The settings will be set to DHCP + AutoIP / VXI-11 discovery on".
Answering with "Yes"
resets the LXI LAN default settings
, loads the fac-
tory
‑
preset
instrument default settings
and
restarts the instrument
.
●
Load Setup
To load instrument settings (corresponds to the LOAD key on the front panel; see
the section Loading and Saving Instrument Settings).
●
Load Example Setup
To load instrument settings already prepared by Rohde & Schwarz for a broad
range of typical measurements and available on the instrument as example appli-
cations; these setups are divided into various application areas (AA, AD, DD, DA)
depending on whether the generator or analyzer is operated with analog or digital
interfaces.
●
Save Setup As
To save instrument settings under a new name or to overwrite a setup that already
exists (corresponds to SAVE key on front panel, see
●
Load Display Plug-in
A plug-in can be selected here that expands the display options of UPV by addi-
tional panels, e.g. a spectrogram representation.
●
Print Preview
A preview window of the current graphic is displayed here which is shown with the
color profile configured for the respective output device. From here, the actual out-
put can be initiated or the action can be canceled.
●
Exit
To exit the R&S UPV measurement program.
Edit
●
Cut
To cut characters, character strings, data, etc., and transfer them to the clipboard.
●
Copy
To copy characters, character strings, data, etc., to the clipboard.
●
Paste
To paste characters, character strings, data, etc., from the clipboard.
●
Select All
To select characters, character strings, data, etc., and transfer them to the clip-
board.
Settings in the Menu Bar