R&S TSMA6B, Начало работы, Страница: 50 / 70

Configuring the R&S TSMA6B
R&S
®
TSMA6B
50 Getting Started 4901.4010.02 ─ 02
6.2.1 Measurement modes
6.2.1.1 PC mode
The "PC Mode" is the standard mode for installation of software and for the inter-
active operation of the R&S TSMA6B.
In this mode, no software application (NESTOR, SmartONE, QualiPoc) is started
in the background.
6.2.1.2 Remote ViCom server mode
The "rVicom Server" mode is only displayed if the R&S Remote ViCom
server software software is installed (see
R&S TSMA6B user manual ).
This mode starts the Remote ViCom server on the R&S TSMA6B. Measurement
configuration and data collection are controlled from a remotely connected hand-
held device. A Remote ViCom client application needs to be installed on the
handheld device for this purpose.
The connection between the Remote ViCom server on the R&S TSMA6B and the
client application (Remote ViCom client) on the handheld device can be realized
via Bluetooth
®
or WLAN.
The selection of the wireless interface type depends on the measurement task.
The WLAN connection allows a data throughput, which is about 10 times
higher compared to Bluetooth
®
.
The Bluetooth
®
connection is less influenced by radio interference.
Prerequisites
●
Bluetooth connection only
See
Chapter 6.4, "Pairing Bluetooth
®
devices" , on page 59.
●
WLAN connection only
Connect the tablet/smartphone with the R&S TSMA6B WLAN AP. See
Chap-
ter 4.7, "Connecting with R&S TSMA6B WLAN access point" , on page 25.
Selecting mode of operation