Preparing for Use
R&S
®
TSMA6-BP
12
Getting Started 4900.9030.02 ─ 03
4.4
Connecting the R&S TSMA6-BP with R&S
TSMA6
To use the R&S TSMA6 with the R&S TSMA6-BP, the following steps must be
performed.
1. Screw the collar screws (1) on the top of the R&S TSMA6-BP with a Torx 8
screw driver.
● Torque: 0.66 Nm
±
0.05 Nm
Figure 4-3: R&S TSMA6-BP
1 = Collar screws for connecting R&S TSMA6
2 = Power connector for R&S TSMA6
3 = Aux 1 / Aux 2
4 = DC IN
5 = Status LEDs for battery 1 and 2
2. Remove the cover cap from the power connector of the R&S TSMA6.
Connecting the R&S TSMA6-BP with R&S TSMA6
