R&S SpycerNode 2U12, Руководство пользователя

Страница: 89 / 136

Administration
89
User Manual | 2902.3266.02 - 08
System Monitoring
SpycerNode
System Monitoring
You can monitor single parts of your system using SNMP data points, or you
can use the R&S
®
Device Manager that allows you to query the state of the
SpycerNode and single parts of the hardware. You will be able to define crit-
ical values and configure an e-mail notification as well. Remote management
(IPMI) is also possible via the R&S
®
Device Manager.
There are various methods to monitor the system:
●
Monitoring through SNMP (page 89)
●
Monitoring through the Device Manager (page 90)
●
Monitoring Disk Arrays (page 92)
Monitoring through SNMP
The Simple Network Management Protocol (SNMP) is a standard internet
protocol for the device management in IP networks. SNMP allows you to e.g.
monitor and query the state of several SpycerNode devices in a network or
single parts of the hardware.
SpycerNode provides a
RS-SPYCERNODE-V1-MIB
that give you the opportu-
nity to query the state of the system or parts of it, using SNMP.
Explanation of the OIDs;
When using a monitoring software, you will have to enter all OIDs once to be
able to monitor the hardware‘s state continuously.
The use of notifications through the hardware manufacturers BMC
system (Ami MegaRAC/Dell iDrac) is not recommended nor sup-
ported by Rohde & Schwarz.