manualshive.com logo in svg

R&S Spectrum Rider FPH, Начало работы, Страница: 24 / 100

Поделиться
Скачать
R&S Spectrum Rider FPH Скачать руководство пользователя страница 24

Preparing for Use

R&S

®

Spectrum Rider FPH

17

Getting Started 1321.0996.02 ─ 09

Battery dispatched during delivery is not fully charged, for battery operation
you have to charge it first.
To charge the battery, connect the charger to AC power adapter included in
the delivery. For more information, see 

"Using an external battery charger"

on page 17.

Using an external battery charger

You can also use an external battery charger (R&S HA-Z303, order number
1321.1328.02) to charge the battery.

To charge the battery externally, put the battery into the external charger and sup-
ply it with power via the AC power adapter.

An amber LED on the charger indicates the charging process. The LED turns to
green when the battery is fully charged. A red LED on the charger indicates that
the battery is not charging or the charging failed.

Figure 3-3: External battery charger

1 = Lithium ion battery R&S HA-Z306
2 = External charger R&S HA-Z303
3 = Power supply unit R&S HA-Z301 or car adapter R&S HA-Z302

Risk of traffic accidents, physical injury and property damage

●

Turn off the R&S Spectrum Rider while driving or while the engine is on.

●

Operation of the R&S Spectrum Rider via the cigarette lighter socket
while driving or while the engine on is prohibited.

Putting into Operation

Содержание Spectrum Rider FPH





































































































Отзывы:

Нет отзывов