Preparing for Use
R&S
®
Cable Rider ZPH
16
Getting Started 1321.0944.02 ─ 06
Figure 3-3: External battery charger
1 = Lithium ion battery R&S HA-Z306
2 = External charger R&S HA-Z303
3 = Power supply unit R&S HA-Z301 or car adapter R&S HA-Z302
Risk of traffic accidents, physical injury and property damage
●
Turn off the R&S Cable Rider ZPH while driving or while the engine is
on.
●
Operation of the R&S Cable Rider ZPH via the cigarette lighter socket
while driving or while the engine on is prohibited.
3.1.6
Battery Maintenance
The R&S Cable Rider ZPH comes with a lithium-ion battery. In general, these bat-
teries are easy to handle. When you handle the battery, follow the instruction
mentioned in the safety instructions and in the following chapters.
3.1.6.1
Handling
●
The battery has been designed for a specific application. Do not use it for any
other applications.
●
Do not connect batteries in series or parallel as it can cause serious damage.
●
Observe correct polarities during installation and charging.
●
Do not heat over 70°C. The battery contains thermal fuses that could activate
and render the battery inoperable.
Putting into Operation
