Signal Generation Control
Satellite Navigation
195
User Manual 1178.6379.02 ─ 01
18 Signal Generation Control
This section lists settings provided for defining the signal generation start and for gen-
erating signals necessary for synchronization with other instruments.
It covers the following topics:
Local and Global Connector Settings
....................................................................203
18.1 Trigger Settings
Access:
► Select "GNSS > Trigger In".
This tab provides access to the settings necessary to select and configure the trig-
ger, like trigger source and mode, and to arm or trigger an internal trigger man-
ually. The current signal generation status is displayed in the header of the tab
together with information on the enabled trigger mode. As in the "Marker" and
"Clock" tabs, this tab provides also access to the settings of the related connectors.
This section focuses on the available settings.
For information on how these settings affect the signal, refer to section "Basics on ..."
in the R&S
SMW user manual.
Trigger Settings