R&S SMJ100A, Руководство по эксплуатации

Страница: 636 / 874

Remote Control Commands
R&S
®
SMJ100A
620 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:BLANk:APPend
<SampCount>, <Frequency>
Adds a blank segment to the multi segment file.
Setting parameters:
<SampCount> float
Specifies the number of samples.
Range:
512 to 1E7
Increment: 1
*RST:
1000
<Frequency> float
Determines the clock rate.
Range:
400 Hz to Max (depends on instrument type)
Increment: 0.001
*RST:
1E8
Example: SOUR:BB:ARB:WSEG:CONF:SEL "MSegFile"
selects a multi segment file.
SOUR:BB:ARB:WSEG:CONF:BLAN:APP 1000,100000000
adds a blank segment with 1000 samples and 100 MHz clock
rate to the selected multi segment file
Usage: Setting only
Manual operation: See "Clock Rate" on page 402
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CATalog?
Queries the available configuration files in the specified default directory. The configu-
ration files are used to create multi segment waveform files.
Return values:
<Catalog> string
Example: MMEM:CDIR 'D:\user\waveform'
sets the default directory.
BB:ARB:WSEG:CONF:CAT?
reads out all the configuration files in the default directory.
Response: mulit1, multi2
the directory contains the configuration files
multi1.inf_mswv
and
multi2.inf_mswv
.
Usage: Query only
Manual operation: See "Load List" on page 405
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk <Clock>
This command defines the clock rate used for multi segment waveform output in case
of Clock Mode "User" (
:BB:ARB:WSEG:CONF:CLOCk:MODE USER
).
SOURce Subsystem