R&S SMJ100A, Руководство по эксплуатации, Страница: 635 / 874

Remote Control Commands
R&S
®
SMJ100A
619 Operating Manual 1403.7458.32 ─ 14
Return values:
<WSegment> integer
Range:
0 to 1023
*RST: 0
Example: BB:ARB:WSEG?
queries the currently output segment.
Response 2
segment 2 is currently output.
Usage: Query only
Manual operation: See "Current Segment" on page 382
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CLOad <FilenameInput>
Creates a multi segment waveform using the current entries of the specified configura-
tion file.
This multi segment waveform is saved with the file name specified in the configuration
file. The file extension is
*.wv
. ARB is activated, the new multi segment waveform is
loaded and the first segment is output in accordance to the trigger settings.
Setting parameters:
<FilenameInput> string
Example: MMEM:CDIR 'D:\user\'
sets the default directory.
BB:ARB:WSEG:CONF:SEL 'multi_sin'
creates the configuration file
multi_sin.inf_mswv
in the
default directory.
BB:ARB:WSEG:CONF:SEGM:APP 'sinus1'
includes waveform
sinus1.wv
as segment 1 in the configura-
tion file. The waveform must be available in the default directory.
BB:ARB:WSEG:CONF:SEGM:APP 'sinus2'
includes waveform
sinus2.wv
as segment 2 in the configura-
tion file. The waveform must be available in the default directory.
BB:ARB:WSEG:CONF:OFIL 'mseg1_2'
defines the file name
mseg1_2.wv
for the multi segment wave-
form.
BB:ARB:WSEG:CLO 'D:\user\multi_sin.inf_mswv'
creates multi segment waveform
mseg1_2.wv
using the set-
tings of the configuration file
multi_sin.inf_mswv
.
The new multi segment waveform is loaded and ARB is activa-
ted.
Usage: Setting only
Manual operation: See "Save List" on page 405
SOURce Subsystem