R&S SMJ100A, Руководство по эксплуатации, Страница: 59 / 874

Preparing for Use
R&S
®
SMJ100A
43 Operating Manual 1403.7458.32 ─ 14
2.5.3 Login
Windows Embedded Standard requires that users identify themselves by entering a
user name and password in a login window. The instrument provides a factory-installed
auto login function, i.e. login is carried out automatically in the background. The ID
used for autologin has administrator rights so that printer and network installations are
possible. The user name and password are set to "instrument".
2.5.4 Accessing the Start Menu
All necessary system settings can be defined in the "Start > Control Panel" menu (for
required settings refer to the Windows Embedded Standard documentation and to the
hardware description).
Energy saving mode
An energy saving mode is a default setting in the instrument. The hard disk switches to
power-save mode if it is not accessed for 30 minutes. The energy-saving mode is exi-
ted by accessing the hard disk again.
2.6 Setting Up a Network (LAN) Connection
The R&S SMJ is equipped with a network interface and can be connected to an Ether-
net LAN (local area network). Provided the appropriate rights have been assigned by
the network administrator and the Windows firewall configuration is adapted accord-
ingly, the interface can be used, for example:
●
To transfer data between a controlling device and the test device, e.g. in order to
run a remote control program.
See chapter "Remote Control"
●
To access or control the measurement from a remote computer using the "Remote
Desktop" application (or a similar tool)
●
To connect external network devices (e.g. printers)
●
To transfer data from a remote computer and back, e.g. using network folders
This section describes how to configure the LAN interface. It includes the following top-
ics:
●
Chapter 2.6.1, "Connecting the Instrument to the Network" , on page 44
●
Chapter 2.6.2, "Assigning the IP Address" , on page 45
LXI
The R&S SMJ complies with LXI Class C. LXI gives you direct access to the LAN set-
tings described below.
Setting Up a Network (LAN) Connection