Remote-Control Commands
R&S
®
SMCVB-K163
71
User Manual 1179.0997.02 ─ 02
Parameters:
<Guardint>
G1_32 | G1_16 | G1 | G1_ | G1_8 | G1_4
*RST:
G1_32
Example:
See
Example "Configure coding properties"
Manual operation:
See
[:SOURce<hw>]:BB:DVBT:RATE:LOW
<CodeRateLP>
[:SOURce<hw>]:BB:DVBT:RATE[:HIGH]
<CoderateHP>
Sets the code rate.
Parameters:
<CoderateHP>
R1_2 | R2_3 | R3_4 | R5_6 | R7_8
*RST:
R3_4
Example:
See
Example "Configure coding properties"
Manual operation:
See
[:SOURce<hw>]:BB:DVBT:USED[:BANDwidth]
<UsedBW>
Defines the used bandwidth.
Parameters:
<UsedBW>
float
Range:
1000000 to 10000000
Increment: 0.1
*RST:
66562500
Example:
See
Example "Configure coding properties"
Manual operation:
See
6.4
TPS Commands
Example: Configure transmission parameter signaling properties
:SOURce:1:BB:DVBT:CELL:ID #H0
:SOURce:1:BB:DVBT:TPSReserved:STATe 1
:SOURce:1:BB:DVBT:TPSReserved:VALue #H0
:SOURce:1:BB:DVBT:HIERarchy A1
:SOURce:1:BB:DVBT:TIMeslice:HIGH 1
:SOURce:1:BB:DVBT:TIMeslice:LOW 0
:SOURce:1:BB:DVBT:MPEFec:HIGH 0
:SOURce:1:BB:DVBT:MPEFec:LOW 1
TPS Commands