DVB-T Configuration and Settings
R&S
®
SMCVB-K163
39
User Manual 1179.0997.02 ─ 02
Data Rate
Sets the output data rate of the player.
Note:
If "Nullpacket Stuffing > Off", we recommend that you set the output data rate
equal to the original data rate.
If you want to use a different data rate, activate "Nullpacket Stuffing". The function
ensures that the data stream is replayed in the same way as it was recorded. The time
references in the tables of the TS stream are also correct during replay.
Remote command:
Orig. Data Rate
Displays the calculated original TS
data rate.
Remote command:
Packet Length
Requires a
*.trp
,
*.trp_c
,
*.emc
or
*.emc_c
file loaded into the "TS Player" dia-
log.
*.trp
files are previously recorded files.
Displays the packet length of the loaded TS
player file.
Remote command:
Nullpacket Stuffing
Requires a
*.trp
,
*.trp_c
,
*.emc
or
*.emc_c
file loaded into the "TS Player" dia-
log.
*.trp
files are previously recorded files.
Enables or disables nullpacket stuffing.
The output data rate of the TS
player equals the original data rate. The equality
ensures that the time references in the tables of the played TS stream are correct dur-
ing replay.
"On"
Activate stuffing, if you need a higher rate than the original data rate.
Null packets are inserted into the data stream.
To ensure correct time references in the stream tables, activate pro-
gram clock reference correction ("PCR, DTS/PTS > On").
"Off"
Deactivate stuffing, if you want to use the same data rate as the origi-
nal data rate.
Remote command:
Stop Data
Requires a
*.trp
,
*.trp_c
,
*.emc
or
*.emc_c
file loaded into the "TS Player" dia-
log.
*.trp
files are previously recorded files.
Ensures that a standardized TS
data stream is always output at the TS output at the
rear of the R&S
SMCV100B.
In pause or stop status, the TS
generator generates "test packets", which have data
and header parts, that can be configured using the
.
TS Player
