![R&S SMCVB-K161 Скачать руководство пользователя страница 50](http://html1.mh-extra.com/html/rands/smcvb-k161/smcvb-k161_user-manual_3084628050.webp)
Remote-Control Commands
R&S
®
SMCVB-K161
50
User Manual 1179.1035.02 ─ 02
Commands
.................................................................................. 50
....................................................................................... 50
[:SOURce<hw>]:BB:ATSM:INPut:FORMat
..........................................................................50
[:SOURce<hw>]:BB:ATSM:INPut:TSCHannel
..................................................................... 50
[:SOURce<hw>]:BB:ATSM:STUFfing
................................................................................. 51
[:SOURce<hw>]:BB:ATSM:SOURce
<AtscmhSource>
Sets the modulation source for the input signal.
Parameters:
<AtscmhSource>
EXTernal | TSPLayer | TESTsignal
*RST:
EXTernal
Example:
See
Example "Querying input signal properties"
Manual operation:
See
[:SOURce<hw>]:BB:ATSM:INPut
<AtscmhInput>
Sets the external input interface.
Parameters:
<AtscmhInput>
TS | IP
*RST:
TS
Example:
See
Example "Configuring general input signal properties"
Manual operation:
See
[:SOURce<hw>]:BB:ATSM:INPut:FORMat
<InputFormat>
Sets the format of the input signal.
Parameters:
<InputFormat>
ASI | SMPTE
*RST:
ASI
Example:
See
Example "Configuring general input signal properties"
Manual operation:
See
[:SOURce<hw>]:BB:ATSM:INPut:TSCHannel
<TsChannel>
Selects the IP-based transport stream (TS) channel. You can select 1 out of 4 IP TS
channels as input at the "IP Data" interface.
To configure a particular channel, see
Chapter 4.2.4, "IP Channnel x Settings"
Input Signal Commands