R&S SGT100A, Руководство пользователя

Страница: 77 / 593

System Overview
R&S
®
SGT100A
46 User Manual 1176.8674.02 ─ 07
ing settings and settings sequences, these are grouped in the remote control pro-
grams, i.e. application programs.
An instrument may be connected to the controller via any of the supported interfaces
LAN, USB or PCIe.
Figure 5-2: Configuration example: remote control from a controller
For information about remote control, refer to:
●
Chapter 10, "Network and Remote Control Operation" , on page 276
●
Chapter 15.1, "Remote Control Basics" , on page 525
5.2 Managing Files on the R&S SGT
The R&S SGT has internal memory, where you can store waveforms, lists etc. You can
also access these files and manage them as required.
To access files on the R&S SGT
1. Connect the R&S SGT and a Windows PC to the same network.
2. On the PC, open a Windows Explorer window.
3. To connect to the R&S SGT, enter the name of the instrument or its IP address in
the Windows address bar.
Managing Files on the R&S SGT