Remote Control Commands
R&S
®
SGT100A
446
User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:CLIPping:TO
<ClippingTo>
Enables clipping and defines its limits.
Parameters:
<ClippingTo>
integer
Range:
0 to 100
*RST:
100
Example:
See
Example "Generating an RF envelope signal and defining
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:DETRoughing:
FUNCtion
<DetrFunction>
Sets the detroughing function.
Parameters:
<DetrFunction>
F1 | F2 | F3
*RST:
F1
Example:
See
Example "Generating an RF envelope signal and defining
Manual operation:
See
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:DETRoughing:
COUPling
<CouplingState>
Enables/disables deriving the detroughing factor (d) from the selected V
cc
value.
Parameters:
<CouplingState>
0 | 1 | OFF | ON
*RST:
0
Example:
See
Example "Generating an RF envelope signal and defining
Manual operation:
See
"Couple Detroughing Factor with Vcc"
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:DETRoughing:
FACTor
<DetrFactor>
Sets the detroughing factor.
Parameters:
<DetrFactor>
float
Range:
0 to 2
Increment: 1E-3
*RST:
0.2
SOURce Subsystem