R&S SGT100A, Руководство пользователя

Страница: 468 / 593

Remote Control Commands
R&S
®
SGT100A
437 User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:VOUT:MIN <VoutMin>
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:VOUT:MAX <VoutMax>
Queries the minimum and maximum values of the estimated envelope output voltage
V
out
.
Parameters:
<VoutMax> float
Range:
0.04 to 8
Increment: 1E-3
*RST:
1
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "V
out
Min/Max" on page 160
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:BIAS <Bias>
Sets a bias.
Parameters:
<Bias> float
Range:
-4 to 4
Increment: 1E-4
*RST:
0
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "Bias" on page 161
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:OFFSet <Offset>
Sets an offset between the envelope and the inverted envelope signal.
Parameters:
<Offset> float
Range:
-4 to 4
Increment: 1E-4
*RST:
0
Default unit: mV
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "Offset" on page 161
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:VPP[:MAX] <VppMax>
Set the maximum value of the driving voltage V
pp
of the used external DC modulator.
SOURce Subsystem