R&S SGT100A, Руководство пользователя

Страница: 412 / 593

Remote Control Commands
R&S
®
SGT100A
381 User Manual 1176.8674.02 ─ 07
Example: MMEM:CDIR "/var/user/waveform"
sets the default directory.
BB:ARB:MCAR:OFIL 'mcar1_2'
defines the file name
mcar1_2.wv
for the multi carrier wave-
form file
Manual operation: See "Output File" on page 100
[:SOURce<hw>]:BB:ARBitrary:MCARrier:PRESet
Sets all ARB multi carrier parameters to their default values.
Example: SOURce1:BB:ARB:MCARrier:PRESet
Usage: Event
Manual operation: See "Set to Default" on page 95
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SAMPles?
The command queries the resulting file size. The file size is returned in samples.
Return values:
<Samples> integer
Range:
0 to INT_MAX
*RST: 0
Example: BB:ARB:MCAR:SAMP?
queries the file size of the currently calculated multi carrier
waveform.
Usage: Query only
Manual operation: See "File Size" on page 100
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SETTing:CATalog?
Queries the available settings files in the specified default directory. The settings files
are used to set the ARB multi carrier submenu. Only files with the file extension
*.arb_multcarr
will be listed.
Return values:
<Catalog> string
Example: MMEM:CDIR '/var/user/waveform'
sets the default directory
BB:ARB:MCAR:SETT:CAT?
reads out all the settings files in the default directory.
Response: mcar1, mcar2
the directory contains the configuration files
mcar1.arb_multcarr
and
mcar2.arb_multcarr
.
Usage: Query only
SOURce Subsystem