Remote Control Commands
R&S
®
SGT100A
367
User Manual 1176.8674.02 ─ 07
Parameters:
<Amplitude>
float
Range:
0 to 1
Increment: 0.001
*RST:
0.800
Default unit: FS
Example:
BB:ARB:TSIG:RECT:AMPL 0.5
sets the amplitude of the test signal
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:FREQuency
<Frequency>
Sets the frequency of the test signal.
Parameters:
<Frequency>
float
Range:
100 to depends on hardware
Increment: 0.01
*RST:
1000
Example:
SOURce:BB:ARBitrary:TSIGnal:RECTangle:FREQuency
100 kHz
sets the frequency of the test signal of 100 kHz.
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:OFFSet
<Offset>
Sets the DC component.
Parameters:
<Offset>
float
Range:
-1 to 1
Increment: 0.001
*RST:
0
Default unit: FS
Example:
BB:ARB:TSIG:RECT:OFFS 0.5
sets the DC component
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:SAMPles
<Samples>
Sets the number of sample values required for the rectangular signal per period.
Parameters:
<Samples>
integer
Range:
4 to 1000
*RST:
100
SOURce Subsystem