R&S RTO6, Руководство пользователя

Страница: 709 / 2677

Protocol analysis
R&S
®
RTO6
709 User Manual 1801.6687.02 ─ 05
"Label Min" Defines the bit pattern of the label.
In binary format, use the following characters: 1; 0; or X (do not care).
To enter the pattern in other formats use the bit pattern editor, see
Chapter 13.1.7, "Bit pattern editor" , on page 493.
"Label Max" The second label pattern is required to specify a range with condi-
tions "In range" and "Out of range".
Remote command:
TRIGger<m>:ARINc:LABel:CONDition
on page 1988
TRIGger<m>:ARINc:LABel:MIN
on page 1988
TRIGger<m>:ARINc:LABel:MAX
on page 1988
Data setup: Condition, Data Min, Data Max ← Label + Data
The data setup consists of the condition and one or two data patterns.
"Condition" Defines the operator to set a specific data ("Equal" or "Not equal") or
a data range.
"Data Min" Defines the bit pattern of the data.
In binary format, use the following characters: 1; 0; or X (do not care).
To enter the pattern in other formats use the bit pattern editor, see
Chapter 13.1.7, "Bit pattern editor" , on page 493.
"Data Max" The second data pattern is required to specify a range with conditions
"In range" and "Out of range".
Remote command:
TRIGger<m>:ARINc:DATA:CONDition
on page 1986
TRIGger<m>:ARINc:DATA:MIN
on page 1987
TRIGger<m>:ARINc:DATA:MAX
on page 1987
SDI / SSM ← Label + Data
Sets the values for the source/destination identifier (SDI) and the sign/status matrix
(SSM) bits.
Remote command:
TRIGger<m>:ARINc:SDI
on page 1989
TRIGger<m>:ARINc:SSM
on page 1989
Error Conditions
Specifies the error conditions to be triggered on.
Coding error ← Error Conditions
Triggers on a coding error.
Remote command:
TRIGger<m>:ARINc:ERRor:CODing
on page 1987
Parity Error ← Error Conditions
Checks the parity and triggers if the parity is even.
Remote command:
TRIGger<m>:ARINc:ERRor:PARity
on page 1987
ARINC 429 (option R&S RTO6-K530)