Remote Commands Reference
R&S
®
RTC1000
232
User Manual 1335.7352.02 ─ 04
CALCulate:QMATh:DATA:YORigin?
Returns the voltage value for binary value 0 of the indicated waveform. The command
is relevant for data conversion, if binary data format is defined (FORM UINT,8|16|32).
Return values:
<Yorigin>
Voltage in V
Usage:
Query only
CALCulate:QMATh:DATA:YRESolutiont?
Return the vertical bit resolution of the indicated waveform. The command is relevant
for data conversion, if binary data format is defined (FORM UINT,8|16|32).
Return values:
<Yresolution>
For default waveforms, the resolution is 8
bit.
If high resolution, average or filter are set, the resolution is
16
bit.
Usage:
Query only
13.7.2
Reference Waveforms
.................................................................................. 233
...........................................................................................234
.................................................................................. 234
REFCurve<m>:HORizontal:POSition
................................................................................235
..................................................................................... 235
...................................................................................235
....................................................................................... 235
................................................................................. 236
.......................................................................................236
................................................................................. 236
.......................................................................................237
.................................................................................237
REFCurve<m>:STATe
<State>
Displays or hides the selected reference waveform.
Suffix:
<m>
.
1..4
Selects the reference waveform, the internal reference storage.
Quickmath and Reference Waveforms