R&S RTA4000, Руководство пользователя

Страница: 477 / 861

Remote control commands
R&S
®
RTA4000
477 User Manual 1335.7898.02 ─ 08
To set the pulse width and polarity of the trigger out pulse, use:
●
TRIGger:OUT:PLENgth
on page 602
●
TRIGger:OUT:POLarity
on page 602
Parameters:
<PulseOut> ON | OFF
*RST:
OFF
TRIGger:EVENt:WFMSave <SaveWaveform>
If ON, the instrument saves the data of a selected waveform on each trigger event. The
waveform is saved when the acquisition is complete. During saving, the acquisition
stops, and restarts when saving is finished. Thus, the waveform update rate decreases
significantly.
If fast segmentation is active, only the last acquisition is saved.
To select the waveform, use
EXPort:WAVeform:SOURce
.
Set up the target directory, file name and file format, use
TRIGger:EVENt:WFMSave:
DESTination
and
FORMat[:DATA]
.
Parameters:
<SaveWaveform> ON | OFF
*RST:
OFF
TRIGger:EVENt:WFMSave:DESTination <File>
Defines the target directory and file name for a waveform that is saved on trigger event
when
TRIGger:EVENt:WFMSave
is ON.
Parameters:
<File> String parameter
String with path and file name
17.6 Waveform analysis
● Zoom .....................................................................................................................478
● Mathematics ..........................................................................................................479
● Reference waveforms ........................................................................................... 483
● Search ...................................................................................................................487
● History ..................................................................................................................503
Waveform analysis