Power analysis (option R&S
RTA-K31)
R&S
®
RTA4000
367
User Manual 1335.7898.02 ─ 08
e) Scroll down. Select "Power".
To adjust the probes, open the "Probe" menu. For details, see
settings for power measurements"
The settings for the sources is the same as for ripple analysis, see
Top Level
Sets the expected signal high voltage value.
Remote command:
Base Level
Sets the expected signal low voltage value.
Remote command:
Set to Screen
Resets the cursors to their initial positions. This is helpful if the cursors have disap-
peared from the display or need to be moved for a larger distance.
14.6
Switching power measurements
Switching and control loop analysis is used to measure the internal characteristics of a
switching device and the operational reliability of the components.
..........................................................................................373
Switching power measurements