manualshive.com logo in svg

R&S RT-ZA15, Руководство пользователя, Страница: 56 / 58

Поделиться
Скачать
R&S RT-ZA15 Скачать руководство пользователя страница 56

Functional Check

R&S

®

RT

‑

ZD10/20/30

56

User Manual 1410.4550.02 ─ 05

8

 

Functional Check

The functional check confirms the basic operation of the R&S

 

RT

‑

ZD10/20/30 dif-

ferential probe. The functional check is not suitable for verifying compliance with
the probe specifications.

1. Connect the R&S

 

RT

‑

ZD10/20/30 to a Rohde

 

&

 

Schwarz oscilloscope as

described in 

Chapter 2.1, "Connecting the Probe to the Oscilloscope"

,

on page 16.

2. Using a short lead and a mini clip, connect one of the signal sockets to the

square wave output   of the oscilloscope.

3. Using a short lead and a mini clip, connect the other signal socket to the

probe ground connector   of the oscilloscope.

4. Press the [Preset] key and then the [Autoset] key on the oscilloscope.

A square wave with 1

 

V amplitude between 0

 

V and 1

 

V is displayed on the

display.

5. Reverse the pins at the probe and repeat 

step 4

.

Содержание RT-ZA15



























































Отзывы:

Нет отзывов