R&S NRX Series, Руководство пользователя

Страница: 62 / 514

Configuration for All Measurement Types
R&S
®
NRX
62 User Manual 1178.5566.02 ─ 07
6.3.5 Trigger Settings
Access: Main measurement dialog > "Trigger"
For trace or pulse analysis measurements, the access is: Main measurement dialog >
"Trigger" > "Sensor Trigger"
Trigger Mode ................................................................................................................. 62
Trigger Source ...............................................................................................................63
Trigger Level ................................................................................................................. 63
Trigger Advanced .......................................................................................................... 63
└ Source .............................................................................................................63
└ Slope ...............................................................................................................63
└ Level ............................................................................................................... 63
└ Delay ...............................................................................................................63
└ Dropout ........................................................................................................... 64
└ Holdoff .............................................................................................................64
└ Hysteresis ....................................................................................................... 64
Specific Trigger ............................................................................................................. 64
└ Jitter Suppression ........................................................................................... 64
└ Trigger Master State ....................................................................................... 64
└ Trigger Master Port ......................................................................................... 65
└ Trigger Synchronize State .............................................................................. 65
└ Trigger Synchronize Port ................................................................................ 65
└ Trigger 2 Input Impedance ..............................................................................65
Trigger Mode
Controls the trigger execution depending on the settings under "Trigger Source"
on page 63.
"Normal" Continuous triggering with regular trigger events.
"Freerun" Enables a continuous measurement. The power sensor executes one
measurement cycle after the other.
"Single" Disables continuous triggering so that only one trigger event at a time
is executed. To enable triggering again, press [1Trig].
Triggering
www.allice.de Allice Messtechnik GmbH