Configuration for All Measurement Types
R&S
®
NRX
47
User Manual 1178.5566.02 ─ 05
............................................................................................49
............................................................................................49
............................................................................................ 50
............................................................................................ 51
............................................................................................ 52
Forward Lower Limit State, Reflection Lower Limit State
............................... 52
Forward Lower Limit, Reflection Lower Limit
.................................................. 52
Forward Upper Limit State, Reflection Upper Limit State
............................... 52
Forward Upper Limit, Reflection Upper Limit
.................................................. 53
Resolution
Configures the resolution of the measurement. For logarithmic power values (dB, dBm
or dB
μ
V), the number of decimal places is set directly. For linear power values (W,
∆
%,
1), the number of decimal places depends on the selected resolution and the magni-
tude of the result.
"1
dB
| 0.1
dB
|
0.01
dB
|
0.001
dB "
Sets the resolution to a specific value.
Remote command:
CALCulate<Measurement>:RESolution
Unit
Specifies the unit of the display. The available units depend on the
"dBm"
Power in dBm
"dB
μ
V"
Power in dB
μ
V
"W"
Power in W
"dB"
Quotient of the power values as dB
"
Δ
%"
Difference between the power values in W, given in %. 0 % means
that the powers in both channels are equal.
"x1"
Quotient of the power values (non-logarithmic)
Display Settings