R&S NRX-B4, Руководство пользователя

Страница: 32 / 450

Operating Concepts
R&S
®
NRX
32 User Manual 1178.5566.02 ─ 05
The "Primary Sensor" dialog is displayed.
See
Chapter 9, "Sensor Configuration" , on page 104.
► Tap the displayed limit values , (2) in Figure 5-2 , to change the measurement type,
assign a sensor, access the sensor settings, ...
The "Limit Monitor" dialog is displayed.
See
"Limit Monitor" on page 51.
► Tap the displayed measurement value or graph , (3) in Figure 5-2 , to change the
measurement type, assign a sensor, access the sensor settings, ...
The "Measurement Settings" dialog is displayed.
See
Chapter 7.4, "Measurement Settings Dialog" , on page 60.
► Tap an element in the navigation pane , (4) in Figure 5-2 , to configure the trigger,
the presentation of the measurement result and further measurement-specific set-
tings.
See
Chapter 7, "Configuration for All Measurement Types" , on page 46.
Tapping other areas in the measurement pane can open further dialogs, but these dia-
logs are measurement-specific and there is no general rule that applies to all measure-
ments.
5.1.3 Status Information
The status information is displayed in the upper right corner, left from the notification
center. See
Figure 5-1 .
Table 5-1: Status symbols
Symbol Description Further information
Memory stick is connected and ready for use. Chapter 4.9, "Connecting USB and
External Devices"
, on page 28
Memory stick is connected and initialization is in pro-
gress. When the moving green dot vanishes, the
memory stick is ready for use.
Rem
R&S NRX is in remote control. Chapter 5.3.2, "Returning to Manual
Operation (LOCAL)"
, on page 40
Manual Operation