R&S NRX-B4, Руководство пользователя

Страница: 180 / 450

Remote Control Commands
R&S
®
NRX
180 User Manual 1178.5566.02 ─ 05
DISPlay:MESSage:TEXT[:DATA] <string>
Defines the text for user-defined messages.
Parameters:
<string> ASCII characters from code 32 to code 126
Line break: string "\n"
The length depends on the message type: max. 4 lines for mes-
sages and max. 2 lines for queries. The length of a line depends
on the characters used. Too long lines are cut off, indicated by
"..." at the end of the line.
DISPlay:MESSage:TYPE <type>
Sets the message type for the user-defined messages.
Parameters:
<type> QUERy | MESSage
QUERy
The execution of remote control commands is blocked, until the
dialog containing the query is closed by pressing the [MENU]
key.
MESSage
Remote control command processing is immediately continued.
Close the dialog containing the message using
DISPlay:
MESSage[:STATe] OFF
.
*RST: MESSage
DISPlay:MESSage[:STATe] <state>
If enabled, displays a dialog containing a user-defined message.
Define the message text using
DISPlay:MESSage:TEXT[:DATA]
.
Parameters:
<state>
DISPlay:LAYout <layout>
Sets the number of measurement panes. See also Chapter 5.1.5, "Selecting the Dis-
play Layout" , on page 34.
Parameters:
<layout> L1 | L2 | L3 | L4
*RST:
L1
Measurement Settings and Results