Sensor Configuration
R&S
®
NRX
119
User Manual 1178.5566.02 ─ 05
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:BURSt:PERiod
Burst Width
Available if "User" is set under
Sets the burst width.
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:BURSt:WIDTh
Direction
Automatically determines the direction of the forward power or sets a fixed direction.
"Auto"
Determines the power flow direction automatically. The greater value
of two measured values is automatically assigned as forward power.
"1
>
2", "2
>
1"
Sets a fixed direction of the forward power, either from port
1 to
port
2, or from port
2 to port
1.
The two ports are indicated on the directional power sensor.
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:DIRection
CCDF Threshold
Sets the threshold for the complementary cumulative distribution function,
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:CCDF:THReshold
PEP Hold Time
Sets the hold time of the peak hold circuit of the power sensor. See also
.
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:NRT:PEP:HOLD:TIME
9.5.2
NRT Correction Settings
Access: "Measurement Main Configuration" > "Sensor Configuration" > "Correction"
For NRT Measurement Type