Instrument Tour
R&S
®
NRT2
24
Getting Started 1430.0573.02 ─ 03
●
Deletes numbers or text in a field so that you can enter a new value.
Enter
●
Confirms entries in text fields, dialogs and selections in lists.
●
Shows a frame around the control in focus. You can change the focus using
the
[Freq]
Sets the carrier frequency of the applied signal. This value is used for fre-
quency-response correction of the measurement result.
Favorites
Reserved for future use.
[Preset]
Opens the "Save / Recall / Preset" dialog.
If you press [Preset] again, the preset function starts.
If you press the [Preset] key during booting, the R&S NRT2 starts with the factory
default state.
[Zero]
Pressing [Zero] opens the "Zeroing Sensors" dialog.
If you press [Zero] again, zeroing starts.
Also displays status information:
●
Zeroing status
●
Sensor status
[System]
Opens the "System Overview" dialog.
Cursor keys
See (4) in
.
The cursor keys are context-sensitive. The control in focus is indicated by a focus
frame. Use the cursor keys as follows:
●
Selecting an element in the navigation pane.
●
Selecting the active pane.
●
Selecting an element from a list.
●
Moving the cursor in text boxes.
●
Changing the value of an entry in a text box.
Front Panel Tour