R&S NRT-Z14, Начало работы

Страница: 30 / 34

Operating concepts
R&S
®
NRT-Z14/44
30 Getting Started 1443.8632.02 ─ 01
To ready the power sensor for measuring
1. Open the terminal program.
2. Send
appl
.
3. Wait for a response; see Chapter 5.3.2.3, "Behavior during booting" ,
on page 31.
4. Repeat step 2 and step 3 until the power sensor responds with:
@8E oper _____________________________________________
After receiving the response, you can make settings and query results.
To test the connection
1. Open the terminal program.
2. Enter the string
test
.
3. Confirm with the return key.
The power sensor responds:
@17 0 - This is a test string__________________
@18 1 - This is a test string__________________
@19 2 - This is a test string__________________
...
@37 97 - This is a test string__________________
@38 98 - This is a test string__________________
@39 99 - This is a test string__________________
See also Chapter 5.3.2.3, "Behavior during booting" , on page 31.
To query the identification
► Send the
id
command.
The power sensor responds with its identification string.
Example:
@6E Rohde&Schwarz NRT-Z14 V3.00 2021-12-01____
To query the last result
► Send
rtrg
.
The power sensor responds with:
@11 +2.1234E+01 +2.1530E+01 __avrl15500 ________
Remote control