R&S NRP Series, Начало работы

Страница: 16 / 52

Preparing for use
R&S
®
NRP Series
16 Getting Started 1419.0170.02 ─ 16
2. Remove the cable.
3.7 Connecting to a controlling host
As a controlling host, you can use:
●
Computer
●
Base unit
For operating the power sensor, you can choose from various possibilities. For
details, see
Chapter 5, "Operating concepts" , on page 32.
3.7.1 Computer
If the controlling host is a computer, you can operate the power sensor in several
ways. For details, see
Chapter 5, "Operating concepts" , on page 32.
► Establish the connection using:
● Host interface
See Chapter 3.7.1.1, "Simple USB connection" , on page 16.
See Chapter 3.7.1.2, "R&S NRP
‑
Z5 sensor hub setup" , on page 17.
● LAN interface, if the power sensor is a LAN power sensor
See Chapter 3.7.3, "Using a LAN connection" , on page 20.
3.7.1.1 Simple USB connection
All R&S NRP power sensors can be connected to the USB interface of a com-
puter.
Required equipment
●
R&S NRP power sensor
●
R&S NRP
‑
ZKU cable
Connecting to a controlling host