R&S NRP P Series, Руководство пользователя

Страница: 84 / 152

Remote control commands
R&S
®
NRPxxP
84 User Manual 1179.5760.02 ─ 02
User interface of the S-Parameters program
Figure 8-10: S-Parameters dialog
Menu bar ....................................................................................................................... 84
└ File .................................................................................................................. 84
└ Sensor .............................................................................................................85
└ Device ............................................................................................................. 85
└ Options ............................................................................................................85
└ User Data ..............................................................................................85
└ Remote ................................................................................................. 85
└ Show Cal. Data .....................................................................................85
Global Flags .................................................................................................................. 86
└ S-Parameter Correction ON by Default .......................................................... 86
└ S-Parameter Correction State Locked ............................................................ 86
└ S-Parameter Device Locked ........................................................................... 86
└ Use Flags in Factory Cal. Data Set .................................................................87
Device table .................................................................................................................. 87
Menu bar
Contains the following submenus.
File ← Menu bar
Provides options for loading and saving calibration data files, see:
●
"To change the S-parameter data" on page 89
●
"To load an uncertainty parameter file" on page 90
Configuring basic measurement parameters