Instrument Tour
R&S
®
NGL200/NGM200
22
Getting Started 1178.8720.02 ─ 04
2. Connect the power cable to the socket outlet.
3. Press [Power] key on the front panel.
The instrument performs a system check, boots the operating system, and
starts the R&S
NGL/NGM firmware.
By default, all output channels are turned off when the instrument is switched on
to prevent connected loads from being damaged unintentionally.
During startup, the R&S
NGL/NGM is loaded with the last saved instrument set-
tings from internal memory. See "Store and Recall" in the User Manual.
To switch off instrument:
1. Press [Power] key.
All current settings are saved to internal memory and the firmware shuts
down.
2. Disconnect the AC power cable from the instrument.
Switching On the Instrument
