R&S NGE-K101, Руководство пользователя

Страница: 53 / 105

Instrument Functions
R&S
®
NGE100B
51 User Manual 5601.1343.02 ─ 02
Figure 5-21: WLAN dialog
2. Select "Enabled" for "Module".
3. Set the "SSID"
SSID - Service Set Identifier, an unique ID used for naming wireless network.
4. Set the associated password for the "SSID".
5. Select the "Connect" button.
If connection is successful, the "Status" shows "Connected". See Figure 5-22 .
When the connection is alive, the WLAN icon turns green on the status bar. See
Figure 5-1 .
Figure 5-22: WLAN connected
6. To disconnect, select "Disconnect" in the WLAN dialog.
5.6.2 USB Connection
Alternatively, connect a USB cable to the USB port (see Figure 4-4 for the location of
the USB port and PC for a USB connection. The R&S NGE100B supports USB TMC
and USB VCP connection.
For more information, see Chapter 6.1.1, "USB" , on page 59.
1. Select "Interface > USB" menu item.
The R&S NGE100B displays the "USB" dialog. See Figure 5-23 .
Connecting to a Network
www.allice.de Allice Messtechnik GmbH