R&S FSW Series, Руководство пользователя

Страница: 783 / 1450

Network and Remote Operation
R&S
®
FSW
783 User Manual 1173.9411.02 ─ 43
# python script created by FSW: 29:11:2017 09:08:53
import visa
# connect to instrument (MU717225)
VisaResourceManager = visa.ResourceManager()
FSW = VisaResourceManager.open_resource("TCPIP::10.124.0.195::INSTR")
# Display update ON
FSW.write("SYST:DISP:UPD ON")
FSW.write("*RST")
FSW.write("INIT:CONT OFF")
FSW.write("SENS:FREQ:CENT 850000000")
FSW.write("SENS:FREQ:SPAN 4000000")
FSW.write("DISP:WIND:SUBW:TRAC:Y:SCAL:RLEV 10")
FSW.write("CALC:MARK:FUNC:POW:SEL ACP")
FSW.write("CALC:MARK:FUNC:POW:PRES S2CD")
FSW.write("SENS:ADJ:LEV;*WAI")
FSW.write("SENS:POW:HSP ON")
FSW.write("TRAC1:DATA? TRACE1")
FSW.query("CALC1:MARK:Y?")
FSW.write("CALC1:MARK:FUNC:POW:RES? CPOW")
# Back to local mode
FSW.write("@LOC")
13.5 Network and Remote Control Settings
Access : [SETUP] > "N Remote"
Network settings in secure user mode
Be sure to store all network settings before SecureUser Mode is enabled; see Chap-
ter 5.1.7, "Protecting Data Using the Secure User Mode" , on page 43.
If the currently stored network settings are not suitable, you must correct them each
time you switch on the R&S
FSW in secure user mode, as the settings are not stored
permanently in this case.
The remote commands required to define these settings are described in Chap-
ter 14.10.7, "Configuring the Network and Remote Control" , on page 1295.
Step-by-step instructions are provided in Chapter 13.6, "How to Set Up a Network and
Remote Control" , on page 797.
● General Network Settings ..................................................................................... 784
● GPIB Settings ........................................................................................................786
● Compatibility Settings ............................................................................................789
Network and Remote Control Settings