R&S FSW Series, Руководство пользователя

Страница: 42 / 1450

Getting Started
R&S
®
FSW
42 User Manual 1173.9411.02 ─ 43
<Type><variant>-<serial_number>
The serial number can be found on the rear panel of the instrument. It is the third part
of the device ID printed on the bar code sticker:
For example, FSW13-123456
To change the computer name
1. Press the [Setup] key and then the "N Remote" softkey.
The current "Computer Name" is displayed in the "Network" tab.
2. Enter the new computer name.
3. Close the dialog box.
5.1.5.4 Changing the Windows Firewall Settings
A firewall protects an instrument by preventing unauthorized users from gaining access
to it through a network. Rohde & Schwarz highly recommends the use of the firewall on
your instrument. Rohde & Schwarz instruments are shipped with the Windows firewall
enabled and preconfigured in such a way that all ports and connections for remote
control are enabled.
For more details on firewall configuration, see the following Rohde & Schwarz White
Paper:
●
1EF96: Malware Protection Windows 10
Note that changing firewall settings requires administrator rights.
5.1.6 Configuring the Initial Instrument Settings
This section describes how to setup the R&S FSW initially. For further basic instrument
settings, see the R&S FSW User Manual.
● Setting the Date and Time ...................................................................................... 42
5.1.6.1 Setting the Date and Time
Users with administrator rights can set the date and time for the internal real time clock
as follows:
Opening the Date and Time Properties dialog box
1. Press the [SETUP] key.
Preparing for Use