R&S FSW Series, Руководство пользователя

Страница: 17 / 1450

Preface
R&S
®
FSW
17 User Manual 1173.9411.02 ─ 43
1 Preface
This chapter provides safety-related information, an overview of the user documenta-
tion and the conventions used in the documentation.
1.1 About this Manual
This User Manual describes general instrument functions and settings common to all
applications and operating modes in the R&S
FSW. Furthermore, it provides all the
information specific to RF measurements in the Spectrum application . All other
operating modes and applications are described in the specific application manuals.
The main focus in this manual is on the measurement results and the tasks required to
obtain them. The following topics are included:
●
Welcome to the R&S FSW
Introduction to and getting familiar with the instrument
●
Operating Modes and Applications
The concept of using multiple operating modes
●
Measurements
Descriptions of the individual measurements in the Spectrum application, including
result types and configuration settings.
●
Common Measurement Settings
Description of the measurement settings common to all measurement types with
their corresponding remote control commands
●
Common Measurement Analysis and Display Functions
Description of the settings and functions provided to analyze results independently
of the measurement type with their corresponding remote control commands
●
Data Management
Description of general functions to handle data files (configuration and result data,
not I/Q data)
●
General Instrument Setup
Description of general instrument settings and functions that are independent of
the current operating mode
●
Network and Remote Operation
Information on setting up the instrument in a network and operating it remotely.
●
Remote Commands
Remote commands required to configure and perform measurements in a remote
environment, sorted by tasks
Remote commands required to set up the environment and to perform common
tasks on the instrument, sorted by tasks
Programming examples demonstrate the use of many commands and can usually
be executed directly for test purposes
●
Maintenance
Information on tasks required to maintain operability of the instrument
About this Manual