Remote Commands
R&S
®
FSW
1374
User Manual 1173.9411.02 ─ 43
Parameters:
<Period>
Range:
150 ns to 1000 s
*RST:
150 ns
Default unit: S
Example:
TRIG:SOUR BBP
Sets the baseband power trigger source.
TRIG:BBP:HOLD 200 ns
Sets the holding time to 200 ns.
TRIGger[:SEQuence]:RFPower:HOLDoff
<Time>
This command defines the holding time before the next trigger event. Note that this
command is available for any trigger source, not just RF Power.
Note that this command is maintained for compatibility reasons only. Use the
TRIGger[:SEQuence]:IFPower:HOLDoff
on page 1050 command for new remote
control programs.
Parameters:
<Time>
Default unit: S
14.15
Programming Examples
Some advanced programming examples for complex measurement tasks are provided
here.
Programming Examples
Содержание FSW Series
Страница 1: ...R S FSW Signal and Spectrum Analyzer User Manual User Manual Version 43 1173941102 2...
Страница 16: ...Contents R S FSW 16 User Manual 1173 9411 02 43...
Страница 1388: ...Maintenance R S FSW 1388 User Manual 1173 9411 02 43 c If necessary remove any excess moisture with a dry soft cloth Cleaning...