R&S FSW Series, Руководство пользователя

Страница: 1333 / 1450

Remote Commands
R&S
®
FSW
1333 User Manual 1173.9411.02 ─ 43
Parameters:
<Language> "SCPI" | "8560E" | "8561E" | "8562E" | "8563E" | "8564E" |
"8565E" | "8566A" | "8566B" | "8568A" | "8568A_DC" | "8568B" |
"8568B_DC" | "8591E" | "8594E" | "71100C" | "71200C" |
"71209A" | "PSA89600" | "PSA" | "PXA" | "FSP" | "FSU" |
"FSQ" | "FSV" | "FSEA" | "FSEB" | "FSEM" | "FSEK"
*RST:
SCPI
Example: SYST:LANG 'PSA'
Emulates the PSA.
Manual operation: See "Language" on page 790
Note : If you use "PSA89600" , you must switch to an HP language first before return-
ing to SCPI (in remote operation only). For the identical language "PSA", this inter-
mediate step is not necessary.
SYSTem:PREamp <Option>
This setting defines which option is returned when the
*OPT?
query is executed,
depending on the used preamplifier.
It is only available for FSU/FSQ emulation, and only if an optional preamplifier is used
by the R&S
FSW.
Parameters:
<Option> B23 | B24
*RST:
B23
Manual operation: See "FSU/FSQ Preamplifier" on page 792
SYSTem:PSA:WIDeband <State>
This command defines which option is returned when the
*OPT?
query is executed,
depending on the state of the wideband option.
It is only available for PSA89600 emulation.
Parameters:
<State> ON | OFF | HIGH
OFF
The option is indicated as "B7J"
ON
The 40 MHz wideband is used.
The option is indicated as "B7J, 140".
HIGH
The 80 MHz wideband is used.
The option is indicated as "B7J, 122".
*RST:
OFF
Manual operation: See "Language" on page 790
See "Wideband" on page 792
Emulating Other Instruments' Commands