R&S FSW Series, Руководство пользователя

Страница: 1221 / 1450

Remote Commands
R&S
®
FSW
1221 User Manual 1173.9411.02 ─ 43
CALCulate<n>:LIMit<li>:UPPer:THReshold <Limit>
This command defines an absolute limit for limit lines with a relative scale.
The R&S FSW uses the threshold for the limit check, if the limit line violates the thresh-
old.
Suffix:
<n>
.
irrelevant
<li> Limit line
Parameters:
<Limit> Numeric value.
The unit depends on
CALCulate<n>:LIMit<li>:UNIT
on page 1218.
*RST:
-200
Default unit: dBm
Manual operation: See "Threshold" on page 567
Managing Limit Lines
Useful commands for managing limit lines described in the R&S FSW User Manual:
●
MMEM:SEL[:ITEM]:LIN:ALL
●
MMEM:STOR:TYPE
●
MMEM:LOAD:TYPE
Remote commands exclusive to managing limit lines:
CALCulate<n>:LIMit<li>:ACTive?
...................................................................................1221
CALCulate<n>:LIMit<li>:COPY
......................................................................................1222
CALCulate<n>:LIMit<li>:DELete
.................................................................................... 1222
CALCulate<n>:LIMit<li>:STATe
......................................................................................1222
CALCulate<n>:LIMit<li>:TRACe<t>:CHECk
.................................................................... 1223
MMEMory:LOAD<n>:LIMit
............................................................................................ 1223
MMEMory:STORe<n>:LIMit
.......................................................................................... 1223
CALCulate<n>:LIMit<li>:ACTive?
This command queries the names of all active limit lines.
Suffix:
<n>
.
irrelevant
<li> irrelevant
Return values:
<LimitLines> String containing the names of all active limit lines in alphabeti-
cal order.
Example: CALC:LIM:ACT?
Queries the names of all active limit lines.
Usage: Query only
Analyzing Measurements (Basics)