R&S FSW-K7 Скачать руководство пользователя страница 67

Страница: 67 / 407

Configuration

R&S

FSW-K7

User Manual 1173.9240.02 ─ 23

Full Scale Level

The "Full Scale Level" defines the level and unit that should correspond to an I/Q sam-
ple with the magnitude "1".

If "Auto" is selected, the level is automatically set to the value provided by the connec-
ted device.

Remote command:

INPut:DIQ:RANGe[:UPPer]

on page 214

INPut:DIQ:RANGe[:UPPer]:UNIT

on page 214

INPut:DIQ:RANGe[:UPPer]:AUTO

on page 214

Adjust Reference Level to Full Scale Level

If enabled, the reference level is adjusted to the full scale level automatically if any
change occurs.

Remote command:

INPut:DIQ:RANGe:COUPling

on page 214

Connected Instrument

Displays the status of the Digital Baseband Interface connection.

If an instrument is connected, the following information is displayed:

●

Name and serial number of the instrument connected to the Digital Baseband Inter-
face

●

Used port

●

Sample rate of the data currently being transferred via the Digital Baseband Inter-
face

●

Level and unit that corresponds to an I/Q sample with the magnitude "1" (

Full Scale

Level

), if provided by connected instrument

Remote command:

INPut:DIQ:CDEVice

on page 213

DigIConf

Starts the optional R&S

DigIConf application. This function is available in the In-/Output

menu, but only if the optional software is installed.

Note that R&S

DigIConf requires a USB connection (not LAN!) from the

R&S

FSW to the R&S

EX-IQ-BOX in addition to the Digital Baseband Interface

connection. R&S

DigIConf version 2.20.360.86 Build 170 or higher is required.

To return to the R&S

FSW application, press any key. The R&S

FSW application is dis-

played with the "Input/Output" menu, regardless of which key was pressed.

For details on the R&S

DigIConf application, see the "R&S

EX-IQ-BOX Digital Inter-

face Module R&S

DigIConf Software Operating Manual".

Note:

If you close the R&S

DigIConf window using the "Close" icon, the window is

minimized, not closed.
If you select the "File > Exit" menu item in the R&S

DigIConf window, the application is

closed. Note that in this case the settings are lost and the R&S

EX-IQ-BOX functional-

ity is no longer available until you restart the application using the "DigIConf" softkey in
the R&S

FSW once again.

Input and Frontend Settings

Содержание FSW-K7
























































































































































































































































































































































































































Результаты поиска

Содержание FSW-K7

Отзывы:

Бренды по названию

Популярные бренды

R&S FSW-K7, Руководство пользователя

Результаты поиска

Содержание FSW-K7

Отзывы:

Бренды по названию

Популярные бренды