R&S FSMR3000, Руководство пользователя

Страница: 244 / 733

Data Management
R&S
®
FSMR3000
244 User Manual 1179.0116.02 ─ 02
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the [UNDO/
REDO] keys.
Remote command:
MMEMory:LOAD:STATe
on page 571
9.3.2 Configurable Storage and Recall
The more sophisticated storage and recall functions allow you to define which settings
are stored, and where the settings file is stored to. Any settings file can be selected for
recall.
● Stored Data Types ................................................................................................ 244
● Storage Location and Filename ............................................................................ 244
● Save and Recall Dialog Boxes ..............................................................................245
● Startup Recall Settings ..........................................................................................248
9.3.2.1 Stored Data Types
The following types of data can be stored to and loaded from files via the "Save" dialog
box on the R&S
FSMR3:
Table 9-1: Items that can be stored to files
Item Description
Current Settings Current instrument and measurement settings.
All Transducers All transducer factor files .
(Note: Restoring a saveset overwrites transducer factor files on the hard disk
that have the same name as those in the saveset. For more information, see
"Saving and recalling transducer and limit line settings" on page 241.)
(Not in the phase noise application.)
All Traces All active traces.
All Limit Lines All limit line files .
Spectrograms Spectrogram trace data (only available if spectrogram display is currently
active).
(Only in applications that feature a spectrogram, for example the (optional)
spectrum application.)
9.3.2.2 Storage Location and Filename
The data is stored on the internal flash disk or, if selected, on a memory stick or net-
work drive. The operating system, firmware and stored instrument settings are located
on drive C.
Storing and Recalling Instrument Settings and Measurement Data