Operating the R&S
FSH
‑
Z114
R&S
®
FSH-Z114
13
User Manual 1321.2501.02 ─ 01
//Query the frequency counter results
CALC:MARK:COUN:FREQ?
Note that changing an instrument setting (frequency, span, bandwidth etc.) or start-
ing a new sweep via the commands
INIT
or
*TRG
will reset the frequency counter.
To obtain the desired frequency accuracy the settling times mentioned in the pro-
gramming example should be taken care of.
●
30
s for results with nominal frequency accuracy.
●
120
s for results with the specified frequency accuracy.
Software Requirement
The R&S
FSH
‑
Z114 requires firmware version 2.12 or higher.
Supported Instrument Models
Designation
Type
Order No.
Spectrum Analyzer, 9 kHz to 3.6 GHz, with preamplifier
R&S®FSH4
1309.6000.04
Spectrum Analyzer, 9 kHz to 3.6 GHz, with preamplifier and
tracking generator
R&S®FSH4
1309.6000.14
Spectrum Analyzer, 100 kHz to 3.6 GHz, with preamplifier,
tracking generator and internal VSWR bridge
R&S®FSH4
1309.6000.24
Spectrum Analyzer, 9 kHz to 8 GHz, with preamplifier
R&S®FSH8
1309.6000.08
Spectrum Analyzer, 9 kHz to 8 GHz, with preamplifier and
tracking generator
R&S®FSH8
1309.6000.18
Spectrum Analyzer, 100 kHz to 8 GHz, with preamplifier,
tracking generator and internal VSWR bridge
R&S®FSH8
1309.6000.28
Option R&S
FSH
‑
Z114 is only supported by instruments with serial numbers
>105000
Using the R&S
FSH
‑
Z114
